User guide

Verifying CLI Usage Using the CLI
page 5-10 OmniSwitch AOS Release 7 Switch Management Guide March 2015
Verifying CLI Usage
To display information about CLI commands and the configuration status of your switch, use the show
commands listed here:
For more information about the resulting displays from these commands, see the OmniSwitch AOS Release
7 CLI Reference Guide. Additional information can also be found in “Using “Show” Commands” on
page 5-4.
show session config Displays session manager configuration information (e.g., default
prompt, banner file name, and inactivity timer).
show prefix Shows the command prefix (if any) currently stored by the CLI. Prefixes
are stored for command families that support the prefix recognition fea-
ture.
history Displays commands you have recently issued to the switch. The com-
mands are displayed in a numbered list.
telnet Shows the enable status of the more mode along with the number of
lines specified for the screen display.