User guide

Configuring PIM Verifying IPv6 PIM Configuration
OmniSwitch AOS Release 7 Advanced Routing Configuration Guide March 2015 page 7-43
Verifying IPv6 PIM Configuration
A summary of the show commands used for verifying PIM configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch AOS
Release 7 CLI Reference Guide.
show ipv6 pim sparse Displays the status of the various global parameters for the IPv6 PIM-
Sparse Mode.
show ipv6 pim dense Displays the status of the various global parameters for the IPv6 PIM-
Dense Mode.
show ipv6 pim ssm group Displays the static configuration of IPv6 multicast group mappings for
PIM-Source-Specific Multicast (SSM).
show ipv6 pim dense group Displays the static configuration of IPv6 multicast group mappings for
PIM-Dense Mode (DM).
show ipv6 pim neighbor Displays a list of active IPv6 PIM neighbors.
show ipv6 pim candidate-rp Displays the IPv6 multicast groups for which the local router advertises
itself as a Candidate-RP.
show ipv6 pim group-map Displays the IPv6 PIM group mapping table.
show ipv6 pim interface Displays detailed IPv6 PIM settings for a specific interface. In general,
it displays IPv6 PIM settings for all the interfaces if no argument is
specified.
show ipv6 pim groute Displays all (*,G) states that IPv6 PIM has.
show ipv6 pim sgroute Displays all (S,G) states that IPv6 PIM has.
show ip pim notifications Displays the configuration of the configured notification periods as well
as information on the events triggering the notifications.
show ipv6 mroute Displays multicast routing information for IPv6 datagrams sent by
particular sources to the IPv6 multicast groups known to this router.
show ipv6 pim static-rp Displays the IPv6 PIM Static RP table, which includes IPv6 multicast
group address/prefix length, the static Rendezvous Point (RP) address,
and the current status of the static RP configuration (i.e., enabled or
disabled).
show ipv6 pim bsr Displays information about the elected IPv6 BSR.
show ipv6 pim cbsr Displays the IPv6 Candidate-BSR information that is used in the
Bootstrap messages.