User guide

In This Chapter Configuring PIM
page 7-2 OmniSwitch AOS Release 7 Advanced Routing Configuration Guide March 2015
• Mapping an IPv6 multicast group to a PIM mode—see page 7-37.
• Configuring Candidate Rendezvous Points (C-RPs) in IPv6 PIM—see page 7-38.
• Configuring Candidate Bootstrap Routers (C-BSRs) in IPv6 PIM—see page 7-39.
• Configuring RP-switchover for IPv6 PIM—see page 7-42.
• Verifying IPv6 PIM configuration—see page 7-43.
For detailed information about PIM commands, see the “PIM Commands” chapter in the OmniSwitch AOS
Release 7 CLI Reference Guide.