User guide

Configuring BGP Routing Policies
OmniSwitch AOS Release 7 Advanced Routing Configuration Guide March 2015 page 4-91
Displaying Policies
The following commands are used to display the various policies configured on a BGP router:
For more information about the output from these show commands, see the OmniSwitch AOS Release 7
CLI Reference Guide.
show ip bgp policy aspath-list Displays information on policies based on AS path criteria.
show ip bgp policy community-
list
Displays information on policies based on community list criteria.
show ip bgp policy prefix-list Displays information on policies based on route prefix criteria.
show ip bgp policy prefix6-list Displays information on policies based on route prefix6 criteria.
show ip bgp policy route-map Displays information on currently configured route maps.
show ip bgp path Displays the AS Path details for a specific route.
show ipv6 bgp path Displays the known IPv6 BGP paths for all the routes or a specific route.
show ip bgp neighbors policy Displays the configured policies for the IPv4 peers or a specific peer.
show ip bgp policy route-map Displays policy route map parameters.
show ipv6 bgp neighbors policy Displays the configured policies for all IPv6 peers or for a specific IPv6
peer.