Specifications

ENT_MLE_015989 - Ed 02_2014-10-13
Chapter 13: Topology – Network Services
49/64
Alcatel-Lucent Enterprise Communication Solutions
April 2014 Offer
 Compression algorithm: G711
 Framing: 20ms
 Security: WPA2/PSK
 Standard mode: 802.11a or 802.11g or 802.11n
3.3.5.3.4 Instant access point
Instant AP is a controllerless WLAN solution based on a Virtual Controller (VC) and does not require
any license.
The OmniAccess Instant can be installed at a single site or deployed across multiple geographically-
dispersed locations. Up to 16 OmniAccess Instant Access Points (IAPs) can be controlled by a single
IAP that automatically becomes a primary virtual controller.
The VoWLAN solution is also available for an Instant Access Point infrastructure.
3.3.5.3.5 Remote access point
The remote access point feature allows an Access Point to be deployed on a remote site and be
securely connected to the WAN controller using a VPN over the WAN.
Typically, a remote AP is used to link a home worker to a headquarters office (only one voice user
per remote AP).
Handset C
OmniPCX
Enterprise
IAP
Handset A
LAN switch (layer 2)
Virtual
Controller
Voice
Communication
IP Touch D
Voice
Communication
OT81x8
Handset B
OT81x8 handsets are supported on
Instant AP
IAP behavior is similar to a Campus AP
managed by a WLAN controller:
• Direct RTP between handset A and
IP Touch D, and between handsets
B and C
The single IAP acts as Virtual Controller