Specifications

ENT_MLE_015989 - Ed 02_2014-10-13
Chapter 13: Topology – Network Services
39/64
Alcatel-Lucent Enterprise Communication Solutions
April 2014 Offer
3.3.5.1.3 Cisco compatibility
The Alcatel-Lucent OmniTouch 8118/8128 WLAN Handsets can be included in a Cisco WLAN
environment.
Wireless switches and access points are provided by Cisco, WLAN handsets and the Communication
Server are provided by Alcatel-Lucent Enterprise.
Alcatel-Lucent OmniTouch 8118/8128 WLAN Handsets are compliant with the CCXv2 Cisco
proprietary standard.
3.3.5.1.4 LAN standards and certifications
The Alcatel-Lucent OmniAccess Wireless system is Wi-Fi Alliance certified for 802.11a/b/g/n.
For a list of compliant WLAN controller/Access Point combinations and associated certification IDs,
please refer to the following website:
 http://certifications.wi-fi.org/wbcs_certified_products.php
The Alcatel-Lucent OmniAccess Wireless system is Wi-Fi Alliance certified for WPA and WPA2
(personal and enterprise).
Terms and Definitions
Campus / LAN: network
A topology where:
There is no restriction in terms of bandwidth
All IP components (Alcatel-Lucent OmniTouch 8118/8128 WLAN
Handsets, IP Phones, CS, MG, …) are located on the same LAN/MAN
network (L2 or L3)
All IP components (Alcatel-Lucent OmniTouch 8118/8128 WLAN
Handsets, IP Phones, CS, MG, …) can be located on the same
geographical site or on several sites
WAN / multi-sites: network
A topology where:
There is some restriction in terms of bandwidth between sites
All IP components (Alcatel-Lucent OmniTouch 8118/8128 WLAN
Handsets, IP Phones, CS, MG, …) are located in different IP subnet
(in function of topology)
All IP components (Alcatel-Lucent OmniTouch 8118/8128 WLAN
Handsets, IP Phones, CS, MG, …) are located in different
geographical sites (HQ, regional sites and Branch Offices)
Single CS
IPPBX based on an OmniPCX solution with a primary Communication
Server and (optionally) secondary Communication Server
Multi-CS
IPPBX based on OmniPCX solution with Communication Servers
interconnected via ABC-F2 protocol
IP domain
OmniPCX function used in multi-sites configuration to limit the
number of simultaneous voice communications with the users
belonging to a site (Call Admission Control – CAC)
Define a voice compression/coding algorithm for the extra domain
(site) communications (recommendation: G729) and a voice
compression / coding for the intra domain (site) communications
(recommendation: G711).