Specifications

ENT_MLE_015989 - Ed 02_2014-10-13
Chapter 13: Topology – Network Services
36/64
Alcatel-Lucent Enterprise Communication Solutions
April 2014 Offer
OAW-AP104: 4 x RP-SMA antenna interface connectors
for external antenna support (2 per band)
OAW-AP105: 4 x integrated, omnidirectional antenna
elements (supporting 2x2 MIMO).
1 x 100/1000Base-T Ethernet port
12 V DC for external AC-supplied power
OAW-AP104 OAW-AP105
A line of OmniAccess instant WLAN Access Points (IAPs) based on virtual Controller, Each IAP is
eligible to become Virtual Controller.
OAW-IAP175
Minimum AOS-W 6.1.4-3.0.0.0 to support
IAP175
Dual-Radio IEEE 802.11n (Outdoor)
 802.11a/n and b/g/n
 2x2 MIMO (two spatial streams)
Quad, N-type female interfaces (2 x 2.4 GHz, 2
x 5 GHz) for external antenna support
(supports MIMO)
1 x 100/1000Base-T Ethernet port (auto
sensing link speed and MDI/MDX )
OAW-IAP175P: 48-volt DC 802.3at power over
Ethernet (PoE+)
OAW-IAP175AC: 100-240 volt AC from external
AC power source
OAW-IAP175
OAW-AP274/2755
Dual-Radio (Outdoor)
802.11ac and b/g/n
OAW-AP274 (& OAW-IAP274): 2.4-GHz and 5-
GHz radios, each with 3x3 MIMO and three
combined, diplexed external antenna
connectors
OAW-AP275 (& OAW-IAP275): 2.4-GHz and 5-
GHz radios, each with 3x3 MIMO and three
integrated omnidirectional antennas
1 port 10/100/1000Base-T Ethernet network
interface RJ-45
Maximum power consumption: 23 W
• Direct AC source: 100 V to 240 V AC
• Power over Ethernet (PoE): 48 V DC
(nominal) 802.3at-compliant source
OAW-AP274/275
OAW-IAP134 & 135