Specifications

ENT_MLE_015989 - Ed 02_2014-10-13
Chapter 13: Topology – Network Services
35/64
Alcatel-Lucent Enterprise Communication Solutions
April 2014 Offer
 Up to 1024 AP (Campus AP)
 Up to 1024 Remote AP
 Up to 24576 concurrent devices
OAW-4750:
 Up to 2048 AP (Campus AP)
 Up to 2048 Remote AP
 Up to 32768 concurrent devices
Embedded Stateful Inspection firewall options
allow for robust security solutions.
A line of OmniAccess WLAN Access Points (APs) designed to address the needs of enterprise wireless
LAN deployments. APs include single and dual-radio 802.11a/b/g/n models with a variety of fixed and
detachable antenna options.
APs are small, lightweight and can be securely attached in a variety of locations: on walls, in cubicles,
on desktops and the ceiling. The AP antenna diversity allows for the best signal processing using
dual, omnidirectional antennas.
APs work with all of the OmniAccess 43xx/4x04/6000 series WLAN switches to provide a high
performance, centrally managed, wireless mobility solution for enterprises. APs have an extended
lifespan because they can automatically configure themselves across any L2/L3 network using a
discovery protocol, allowing easy upgrades when new features, capabilities, or standards emerge.
OAW-AP175
Dual-Radio IEEE 802.11n (Outdoor)
 802.11a/n and b/g/n
 2x2 MIMO (two spatial streams)
Quad, N-type female interfaces (2 x 2.4 GHz, 2 x 5 GHz)
for external antenna support (supports MIMO)
1 x 100/1000Base-T Ethernet port (auto sensing link
speed and MDI/MDX )
Power:
 AP-175P: 48-volt DC 802.3at power over Ethernet
(PoE+)
 AP-175AC: 100-240 volt AC from external AC
power source
 AP-175DC: 12-48 volt DC from external DC power
source
Maximum power consumption is 15 watts
OAW-AP175
OAW-AP104 & AP105
Minimum AOS-W 6.1.3.0 to support AP104
Dual Radio (Indoor)
802.11a/n and b/g/n
2x2 MIMO (two spatial stream)