Installation manual

In the procedure below, it is assumed that:
- there is one DHCP server
- no VLAN has to be configured.
Prerequisites
None.
Relocating and retaining the same set
To relocate and retain the same set:
1. Unplug the set.
2. Plug the set into a connector at its new location.
4.5.1.1.3 The Alcatel-Lucent IP Touch 4008 Phone set
The Alcatel-Lucent IP Touch 4008 Phone is a cost reduction of the Alcatel-Lucent IP Touch
4018 Phone with a new transceiver and a new LAN switch.
The Alcatel-Lucent IP Touch 4008 Phone configuration is the same as the Alcatel-Lucent IP
Touch 4018 Phone configuration: both sets share the same profile.
The Alcatel-Lucent IP Touch 4008 phone Extended Edition configuration is the same as the
Alcatel-Lucent IP Touch 4018 Phone configuration.
4.5.2 IP Touch 4028/4038/4068 Phone
4.5.2.1 Commissioning
4.5.2.1.1 Overview
This module presents all the actions required for commissioning: .
- The Alcatel-Lucent 8 series:
• Alcatel-Lucent IP Touch 4028 Phone
• Alcatel-Lucent IP Touch 4038 Phone
• Alcatel-Lucent IP Touch 4068 Phone
- The Alcatel-Lucent IP Touch 8 series phone Extended Edition:
• Alcatel-Lucent IP Touch 4028 phone Extended Edition
• Alcatel-Lucent IP Touch 4038 phone Extended Edition
• Alcatel-Lucent IP Touch 4068 phone Extended Edition
The commissioning of Alcatel-Lucent 8 series and Alcatel-Lucent IP Touch 8 series phone
Extended Edition is the same.
In the following paragrahs, when Alcatel-Lucent IP Touch 4028 Phone, Alcatel-Lucent IP
Touch 4038 Phone and Alcatel-Lucent IP Touch 4068 Phone are mentioned, they also refer to
their extended edition counterpart, unless specifically indicated.
The following figure illustrates the connectors on the base of each set.
Chapter
4
  *+
4-48
        