Installation manual

For Alcatel-Lucent First and Easy Reflexes terminals, the optional module is external to the
terminal; this module can be placed on a table or wall mounted. The installation simply
involves connection between the terminal, the module and the wall sacket.
Wall mounting an optional module
- Drill two holes (separation = 105 mm, diameter = 6 mm).
- Position the fixing screws.
- Attach the module
4.4.2 E-Reflexes Terminals
4.4.2.1 Cabling
4.4.2.1.1 Cabling diagram
3 terminal models are available that are compatible with IP and VoIP standards:
- Advanced e-Reflexes (4035IP)
- Premium e-Reflexes (4020IP)
- Easy e-Reflexes (4010IP)
CONNECTION
  *+
        
4-41