Installation manual

Attaching the line cable:
- Turn the terminal
- Remove the panel at the rear of the terminal (pull it towards the interior of the terminal and
then pull it out).
- Plug in the line cable(connector ) and position it as shown in the illustration below.
- Replace the panel.
Attaching the handset cable:
- Turn the terminal
- Plug in the handset cable (connector ) into the guide intended for this purpose.
Wall mounted
Preparing Premium Reflexes terminals
- Turn the terminal
- Use a screwdriver to remove the two upper rubber feet.
Preparing Advanced Reflexes terminals
- Turn the terminal
- Use a screw driver to remove only the left rubber foot.
Mounting the terminal
- Use the bracket as a drilling template; use the wallplugs and screws provided to attach the
bracket.
  *+
        
4-37