Installation manual

The following table lists the functions controlled by the "Main" software key, the "limited" mode
values and the configuration modularity.
Controlled services Relevant
software
version
Values in
limited mode
Modularity Max Hardware
extension
STANDARD TELEPHONY
Number of Reflexes sets All According to
selected model
+1 236
Number of analog sets All +1 236
MOBILITY
Number of DECT + DECT Reflexes sets All 0 +1 200
Number of Mobile IP Touch sets From R5.0 0 +1 120
CALL MANAGEMENT
ARS All open in
R1.0/R1.1,
closed from R2
open NO
DISA/Transit DISA All open NO
ISVPN on ISDN (ARS required) All closed open NO
QSIG + (ARS required) All closed open NO
Number of Meet Me Conference From R5.1 0 + 1 1
NETWORKS
Number of B-channels All 0 +1 120
Number of B-channels on MIX boards From R4 0 +2 120
INTERNET ACCESS
Internet and Intranet Access All closed open
Proxy: Web cache and Access control All closed open
E-mail server All closed open
VPN Internet All closed open
Internet Access on application board R1.0/R1.1 NO YES YES
DSL From R1.1 closed open
LAN to LAN From R1.1 closed open
Back-up From R2.0 closed open
Loading URL filters From R2.0 closed open
Statistical data From R2.0 closed open
Web and file server (Intranet) From R2.0 closed open
WEB APPLICATION
WCA (Web Communication Assistant):
number of users
From R2.1 0 +1 200
SNMP
SNMP activation From R2.1 closed open
RAS
Number of accesses (B-channels) From R2.0 0 +2 16
Chapter
3
)# #" #
3-4
        