Installation manual

This hardware must be installed on the customer's site, by a qualified installer, in
compliance with the instructions provided with the hardware.
Equipment shall be installed at the factory or in the field by submitter's trained personnel
in accordance with the installation instruction provided with the equipment.
2.4 Equipment
2.4.1 Detailed description
The following table lists the boards available on Alcatel-Lucent OmniPCX Office
Communication Server (S, M or L racks).
Board Function Optional boards Connections
APA2
APA4
APA8
2, 4 or 8 analog trunk line
interfaces
GSCLI: Ground Start
signaling
CLIDSP: CLIP local
management
Analog trunk line (TL),
TL-PS diversion
ATA2
ATA4
2 or 4 analog trunk line
interfaces
MET: pulse meter
receivers (phased out)
Analog trunk line (TL),
TL-PS diversion
BRA2
BRA4
BRA8
2, 4 or 8 T0 basic accesses ISDN network
ISDN-EFM T0/S0
forwarding box
CPUe Processing Unit (up to R1.1) -
64Mb SDRAM
Always equipped with Hard Drive
for Release R5.0 and above
HSL1, HSL2:
interconnection with
add-on modules
AFU, AFU-1: (Auxiliary
Function Unit)
Lanswitch or Ethernet
terminal
Please-wait message player
Tuner for background music
Alarm
Doorphone
Loudspeaker
General call ringer
ISDN-EFM T0/S0
forwarding box
Pulse metering device
OMC
CPU-1
CPU-2
Processing Unit (From R2.0)
Processing Unit (From R3.0) 64
Mb Flash Memory.
Always equipped with Hard Drive
for Release R5.0 and above
HSL1, HSL2:
interconnection with
add-on modules
AFU, AFU-1: (Auxiliary
Function Unit)
VoIP4-1, VoIP8-1 and
VoIP16
Lanswitch or Ethernet
terminal
Please-wait message player
Tuner for background music
Alarm
Doorphone
Loudspeaker
General call ringer
ISDN-EFM T0/S0
forwarding box
Pulse metering device
OMC
Chapter
2
&#' $(  #( #
2-6
        