Installation manual
Remote access can be managed using:
- an ISDN modem
- an analog V34 modem
Remote access using an ISDN modem.
Alcatel-Lucent OmniPCX Office Communication Server is equipped with an 64 K ISDN modem
using PPP protocol for remote access through the public network. The following modems are
validated:
- KORTEX NOVAFAX ISDN 128000/33600 with PPP protocol
- FRITZ ¡X CAPI 2.0 or any standard "FRITZ" modem
- Multitech I Way Hopper MTA 128 ST 128 KBPS ISDN, with the specific ats58=3
configuration
ISDN 64 to 128 KPBS modems handling the PPP protocol are generally compatible and
support CHAP authentication.
Follow the instructions in the installation manual supplied with the modem. Once installed,
configure the modem for RAS.
To use it, simply select Direct Modem and click OK.
Remote connection by analog V34 modem
Alcatel-Lucent OmniPCX Office Communication Server is equipped with an analog modem
V34 for remote access through the public network. Its main characteristics are:
- V34 Modem
- Maximum transmission speed: 33600 bds
- Hayes protocol
In the current version of the system, the V34 "US Robotic" modem has been validated. The
other types of modems were not validated.
The procedures for installation and use are identical to the ISDN modem procedures, just
replace the FRITZ modem by the US Robotics analog modem.
6.2.2.3 DOWNLOADING THE SOFTWARE
Alcatel-Lucent OmniPCX Office Communication Server is delivered either with:.
- A final software including all the countries parameters (S, M and L racks delivered in BTCO
mode) or
- A software tool (Alcatel-Lucent OmniPCX Office Compact Edition system and S, M and L
racks delivered in stock mode).
This software tool is installed on the CPU and must be updated with a further system
software package (including the specific country parameters) also called country software,
so that the installation is complete. The country software needs to be downloaded using
OMC.
6.2.2.3.1 Downloading software for Alcatel-Lucent OmniPCX Office Communication
Server (S, M or L racks delivered in BTCO mode)
To download the software, proceed as follows:
Chapter
6
6-12