Installation manual

___change-end___
Interface classification
- UA link: TBTS
- Hub/Alcatel Reflexes or Alcatel-Lucent 9 series 1 to 3 : TBTS
Maximum distances between Alcatel-Lucent OmniPCX Office Communication
Server and sets
- 0,4 mm cable: 325 m
- 0,5 mm cable: 505 m
- 0.6 mm cable: 730 m
Cables of 3 m and 10 m are available for connecting the sets to the hub.
4.11.1.2 ADDING/REPLACING BOARDS
Except for CPU and CoCPU, any board can be plugged/unplugged when the system is
powered up.
To replace a CPU or a CoCPU board:
- Press the ON/OFF button, the RED led will flash.
- Wait for the LED to go to steady red (about 30 seconds): the system is turned off.
With OMC you can save and subsequently restore the configuration after replacing the CPU
board.
4.11.1.3 CONNECTING A HARD DISK
  *+
        
4-87