Installation manual

Static IP Address

Give an IP address to the Ethernet network card; this address must belong to the same

subnet as the Alcatel-Lucent OmniPCX Office Communication Server. Set the relevant subnet

mask and declare the main CPU of the Alcatel-Lucent OmniPCX Office Communication

Server as default gateway.

Example:

Configuring with Windows XP

Start -> All Programs -> Accessories -> Communications -> Network Connections->

Select the local network connection -> Properties -> Internet Protocol (TCP/IP) -> Use

the following IP address

4.9.1.2 INTERNET BROWSING

4.9.1.2.1 With Proxy

The Internet browser must be configured to use the Proxy server. The IP address of this server

is that of the Alcatel-Lucent OmniPCX Office Communication Server main CPU board that

hosts the "Internet Access" software. The port number used by the proxy is that configured in

WBM: Proxy -> Advanced Parameters -> PROXY Port Number (8000 by default).

Example:

Configuring with Internet Explorer

In Tools -> Internet options -> Connections -> LAN settings

- Check the checkbox Use a Proxy server

- Fill in the address and port fields

- Check the checkbox Do not use the Proxy Server for local addresses

4.9.1.2.2 Without Proxy

Chapter

  *+

4-80

        