Installation manual

___change-end___
Figure 4.57: Rear Panel
1. RJ11 connector for UA line to PCX
2. V24 SUBD9 connector
3. CTI SUBD9 connector
___change-begin___
___change-end___
Figure 4.58: Connector Details
RS 232 port (V24):
Pin Signal Description
1 DCD Data Carrier Detect.
2 TX Transmit data.
3 RX Received data.
4 DTR Data Terminal Ready.
5 GND Protective ground.
6 DSR Data Set Ready.
7 RTS Request To Send.
8 CTS Clear To Send.
9 RI Ringing Indicator.
CTI port:
Pin Signal Description
1
2 TX Data transmission
  *+
        
4-65