Installation guide

OmniAccess OAW-AP70: Installation Guide
26 Part 031644-00 May 2005
2 Align the OmniAccess OAW-AP70 mounting slots to capture
the surface screws.
FIGURE 3-3 Hanging the OmniAccess OAW-AP70 on
Screws
3 Secure the OmniAccess OAW-AP70, if desired.
To prevent the unauthorized removal of the OmniAccess OAW-AP70 from its
installed location, use a Kensington MicroSaver Security Cable (not included).
Wrap the security cable around an immovable object, insert the cable’s lock into
the Kensington Security Slot on the back of the OmniAccess OAW-AP70, and
turn the key.
4 Orient the antennas.
For best performance, swivel the individual antennas or antenna array so that
they are oriented vertically (see Figure 3-1 on page 22). Once mounting is
complete, connect the required cables (see instructions on page 27).