Specifications

OmniAccess Reference: AOS-W System Reference
74 Part 031652-00 May 2005
FIGURE 5-10 RADIUS Server Configuration
A list of currently configured RADIUS servers appears in this section. To edit or
delete an existing server, click the appropriate button. To add a new RADIUS
server, click the “Add” button as shown in the figure below.
FIGURE 5-11 Add RADIUS Server
Available configuration parameters when adding a RADIUS server are:
Server Name – Supply a human-readable name for the RADIUS server. This
name will be referenced in other parts of the configuration when this RADIUS
server is used.
IP Address – Specifies the IP address of the RADIUS server.