Specifications

Show Commands 907
Chapter 31
z Detail Lists
The show commands that display information for a specific device, protocol, or
event present detailed information in a list format. For example.
(Alcatel) # show ap config location 0.0.0
CONFIG_AP_RESULT
----------------
PARAMETER 802.11b/g 802.11a
--------- --------- -------
Location (Bldg.Flr.Loc) 0.0.0 0.0.0
BSSID N/A N/A
Channel 1 36
ESSID ether sphere
Encryption staticWep,dynamicWep TKIP
Device Type ap_mode ap_mode
Authentication opensystem opensystem
Short Preamble Disabled N/A
RTS Threshold (Bytes) 2333 2333
Transmit Power (Level) 2 2
Retry Limit 8 3
DTIM Interval (beacon periods) 1 1
Max Associations 50 50
Beacon Period (millisecs) 100 100
Basic Rates 1,2,5,11 48.54
Transmit Rates 1,2,5,11 48,54
AP Radio Enabled Enabled
Power Management Enabled Enabled
Station Ageout Time (secs) 1000 1000
VLAN ID 0 0
Hidden SSID Disabled Enabled
Deny_Broadcast Probes Disabled Enabled
b/g Mode mixed N/A
Country Code US US
WPA Hexkey N/A N/A
WPA Passphrase N/A N/A
LMS IP N/A N/A
Backup LMS 0.0.0.0 0.0.0.0