Specifications

OmniAccess Reference: AOS-W System Reference
900 Part 031652-00 May 2005
show aaa state user <IP address>
show aaa state configuration
show aaa radius-attributes
This command displays a list of RADIUS attributes that the server will
recognize. For an attribute not on the list to be recognized by the Alcatel switch
it must be configured using the aaa radius-attributes add command.
show aaa stateful-authentication dot1x <name>
This command displays configuration information about RADIUS server/access
point pairs used for stateful 802.1x authentication.
(Alcatel) #show aaa state user 10.3.25.237
Name: Alcatel-alpha-ap, IP: 10.3.25.237, MAC: 00:30:f1:71:93:5c,
Role:ap-role, Age: 03:17:48
Authentication: No, status: not started, method: , protocol: ,
server:
Role Derivation:
ACL Hits:
(Alcatel) #show aaa state configuration
SAPI state: cfgm1, fpapps1, mob1, cert0
switch IP is 10.3.25.1
Master IP is 10.3.25.1
Switch Role is master
USER: cur 11, max 12 total 29
STATION: cur 2, max 3 total 3
ACL: curr 20, tunnel 0