Specifications

OmniAccess Reference: AOS-W System Reference
894 Part 031652-00 May 2005
IEEE 802.1x Commands
show dot1x config
The show dot1x config command displays the current values the 802.1x
authenticator’s parameters.
When the command is executed the system will display a screen similar to the
one below.
show dot1x ap-table
The show dot1x ap-table command and its variants display information about
access points connected to the switch.
Options:
show dot1x supplicant-info list-all
The show dot1x supplicant-info list all command displays details about the
supplicants associated with the switch.
When this command is executed the system returns a screen containing a table
the includes the following information about each of the supplicants.
(Alcatel) # show dot1x config
Authentication Server Timeout :30
Client Response Timeout:30
Fail Timeout :30
Client Retry Count :3
Server Retry Count :2
Reauthentication :Disabled
Reauthentication Time Interval :2147483647
Multicast Key Rotation :Disabled
Multicast Key Rotation Time Interval :1200
Unicast Key Rotation :Disabled
Unicast Key Rotation Time Interval :240
Statefull Authentication :Enabled
Statefull Authentication Response Timeout :30
z dynamic-wep Displays access points using Dynamic WEP
z static-wep Displays access points using Static WEP
z tkip Displays access points using TKIP