Specifications

OmniAccess Reference: AOS-W System Reference
890 Part 031652-00 May 2005
show ap registered location <location>
Different values for STATE are as follows:
z 0: SAPCP_STATE_INIT
z 1: SAPCP_STATE_GOT_TUN_REQ
z 2: SAPCP_STATE_SNT_TUN_RSP
z 3: SAPCP_STATE_GOT_REGISTER
z 4: SAPCP_STATE_SNT_REG_RESP
z 5: SAPCP_STATE_GOT_CONF_REQ
z 6: SAPCP_STATE_SNT_CONF_RSP
z 7: SAPCP_STATE_STEADY
z 8: SAPCP_STATE_SNT_CONF_UPDATE
z 9: SAPCP_STATE_GOT_UPDATE_RSP
z 10: SAPCP_STATE_SNT_IMG_PULL
z 11: SAPCP_STATE_SNT_APBOOT
Steady state (7) is the expected value.
show ap stats <IPaddr><MACaddr>
This command displays statistics about the access point specified by IP
address and MAC address (bssid). The information includes aggregate statistics
and RSSI stats.
(Alcatel) # show ap registered location 0.0.0
AP_REGISTRATIONS_RESULT
-----------------------
LOC SAP_IP LMS_IP .b_MAC .a_MAC STATE
--- ------ ------ ------ ------ -----
1.1.1 10.2.13.194 10.2.13.254 00:30:f1:70:49:93 00:30:f1:71:93:8f 7
1.1.2 10.2.12.253 10.2.12.254 00:30:f1:70:49:4c 00:30:f1:71:93:7d 7
1.1.3 10.1.1.56 10.3.25.1 00:30:f1:70:49:6f 00:30:f1:71:93:d5 7
1.1.4 10.2.12.212 10.2.12.254 00:30:f1:70:49:65 00:30:f1:71:93:54 7
1.2.1 10.3.25.252 10.3.25.1 00:30:f1:70:49:7e 00:30:f1:71:93:53 7
1.2.2 10.3.25.237 10.3.25.1 00:30:f1:70:49:71 00:30:f1:71:93:5c 7
1.2.3 10.3.25.253 10.3.25.1 00:30:f1:70:49:ad 00:30:f1:71:94:08 7
Num APs:7