Specifications

Show Commands 889
Chapter 31
show ap keys <location>
This command displays the keys for the AP in the specified location. If the
encrypt feature has been enabled the keys will display as a string of asterisks
(****).
Use the (Alcatel)(config)# encrypt disable command to see the keys.
show ap-leds <slot>
This command displays the AP LED state for all access points on a specified
slot. The condition numbers are explained below.
show ap locations
This command displays a simple table of AP locations. Use this command to
get location information to use in other show ap commands.
show ap node-config location <location>
This command displays the configuration information for all the nodes in the
specified location.
show ap node-keys location <location>
This command displays the keys for all the nodes at the specified location.See
show ap keys on page 889.
TABLE 31-1 AP LED Conditions
Number Condition
0 AP radio down
1 Unsecure AP found
2 Wireless LAN IDS event
3 Interference detected
4 AP overload
5OK
6 No AP connected