Specifications

Show Commands 887
Chapter 31
Access Point Management Commands
Alcatel Soft AP Commands
show ap config location <location>
This command displays the configuration of a specified access point. Location
and BSSID information about access points may be obtained using the show stm
connectivity command.
show ap config bssid <BSSID>
This command displays the configuration of a specified access point. Location
and BSSID information about access points may be obtained using the show stm
connectivity command.
(Alcatel) (config) #show ap config location 1.1.2
CONFIG_AP_RESULT
----------------
PARAMETER 802.11b/g 802.11a
--------- --------- -------
Location (Bldg.Flr.Loc) 1.1.2 1.1.2
BSSID N/A N/A
Channel 1 36
ESSID alpha-guest alpha-guest
Encryption staticWep staticWep
Device Type am_mode am_mode
Authentication opensystem opensystem
Short Preamble Enabled N/A
RTS Threshold (Bytes) 2333 2333
Transmit Power (Level) 2 2
.
.
.
Hidden SSID Disabled Disabled
Deny_Broadcast Probes Disabled Disabled
b/g Mode mixed N/A
Country Code US US
WPA Hexkey N/A N/A
WPA Passphrase N/A N/A
LMS IP N/A N/A
Backup LMS 0.0.0.0 0.0.0.0