Specifications

OmniAccess Reference: AOS-W System Reference
886 Part 031652-00 May 2005
show stm dos-sta
This command displays information about stations that are currently subject to
DoS (Denial of Service).
show stm essid
This command displays all the active essid’s on the switch.
show stm holes
This command displays all the detected coverage holes.
show stm packets
This command display the last specified number of packets received by the
switch. Options allow you to specify the number of packets to display up to a
maximum of 128, and you may display packets for a specific AP or station by
specifying the station MAC Address.
Options:
show stm state <MacAddr>
This command displays state information about a station with the specified
MAC address.
show stm trace-addr
This command displays the information contained in the Trace Address Buffer.
show stm virtual-ap <bssid>
This command displays information about VLANs on a specific access point
identified by its bssid.
z count Specify the number of packets to display. Max count =
128
z mac The MAC address of a station or AP from which to
display packets.