Specifications

OmniAccess Reference: AOS-W System Reference
68 Part 031652-00 May 2005
FIGURE 5-6 Applying Traffic Policies to Ports
To add traffic policies to ports using the CLI, use the following format:
interface fastethernet 2/13
ip access-group guest session
Firewall Policies
This section provides an ordered list of traffic policies applied to the user role.
Traffic policies are executed in order, with an implicit “deny all” after the final
policy. For more information on firewall and traffic policies, see the section
entitled “
Firewall and Traffic Policies.”
To apply a new policy to the user role, click
Add.
FIGURE 5-7 User Role Traffic Policies
Three options are available when adding new traffic policies to a user role:
Choose from Configured Policies – Select this option to apply a traffic policy
already configured in the system. By default, the policy will be applied to the
user role regardless of where the user is physically located (indicated by
Location 0.0.0). However, if the policy only applies while the user is associated
to a particular AP or is located in a particular building or floor, fill in the