Specifications

OmniAccess Reference: AOS-W System Reference
874 Part 031652-00 May 2005
show am pot-ap-list <am-ip>
This command displays the BSSIDs seen on the specified air monitor which it
cannot classify as access points.
show am pot-sta-list <am-ip>
This command displays the BSSIDs seen on the specified air monitor which it
cannot classify as stations.
show am rf-summary <am-ip>
This command displays the RF statistics for all the channels being monitored by
the specified air monitor.
show am sta-search <am-ip>
This command displays information about stations being monitored by the
specified air monitor.
show am state <am-ip> <bssid | mac>
This command displays the internal state for an access point or station
associated with the specified air monitor.
(Alcatel) (config) #show am pot-ap-list 10.3.25.248
Potential AP Table
------------------
bssid channel phy num-beacons tot-beacons mt at
----- ------- --- ----------- ----------- -- --
00:0b:86:a0:01:fc 36 80211a 0 9 27 0
00:0b:86:20:27:8e 1 80211b 0 9 12 0
00:0b:86:a0:04:15 36 80211a 0 9 13 0
00:0b:86:b0:01:47 1 80211b 0 9 5 0
00:0b:86:20:27:7f 1 80211b 0 9 18 0
00:0b:86:20:27:24 6 80211b 0 9 19 0
00:0b:86:20:27:af 1 80211b 0 9 28 0
Num Potential APs:7