Specifications

Show Commands 863
Chapter 31
show mobile client [verbose <IP>]
This command will display information about mobile clients currently
registered with the home agent. If the command is issued without the IP
argument it will simply show what clients are registered. If the command is
issued with the verbose parameter and the client IP address it will return
detailed information about the client.
(Alcatel) # show mobile client
Mobile Nodes
------------
Id Mac Ip HomeAgent Vlan Location
-- --- -- --------- ---- --------
1 00:30:f1:71:d5:bd 10.3.25.237 10.3.25.1 1 2/4
2 00:30:f1:71:d5:bf 10.2.12.253 10.3.25.1 212 2/12
3 00:30:f1:71:d6:26 10.3.25.182 10.3.25.1 1 2/6
4 00:80:c8:1f:9f:d3 10.3.25.170 10.3.25.1 1 1.2.2
5 00:30:f1:71:d5:ce 10.2.13.174 10.3.25.1 213 2/13
6 00:09:5b:06:3e:e1 10.1.5.1 10.3.25.1 7 2/22
7 00:0b:86:ff:ff:b6 10.1.5.11 10.3.25.1 7 2/22
8 00:04:e2:38:3f:e8 10.1.5.254 10.3.25.1 7 2/22
9 00:30:48:51:05:d5 10.1.5.10 10.3.25.1 7 2/22
(Alcatel) # show mobile client verbose 10.3.25.237
Mac: 00:30:f1:71:d5:bd IP: 10.3.25.237 Roaming State: Home
Switch/Home Vlan
Home Agent: 10.3.25.1 Home Network: 10.3.25.0/24 Home Vlan: 1
Current Location (Mswitch/Vlan/Slot/Port): 10.3.25.1/1/2/4
DHCP Server: 0.0.0.0 DNS Server: 0.0.0.0 Default Gateway: 0.0.0.0
Tunnel Id: No Tunnel Mode: Auto Reverse Lifetime: 300
Authentication: HMac MD5 Replay Method: Nonce Spi: 1000
Shared Secret:Alcatel
Last Reg Request Sent: Never Last Reg Reply Recvd: Never
Last Registration Reply Code: 0 (registration accepted) Total Error
Count: 0