Specifications

OmniAccess Reference: AOS-W System Reference
856 Part 031652-00 May 2005
L2TP Commands
show vpdn tunnel {l2tp|pptp|tunnel} [id <tunnel ID>]
This command displays information about the tunnel specified by tunnelID in
the id parameter.
Information returned when the tunnel id is not specified.
Information returned when the tunnel id is specified.
NOTE—The tunnel id used in the command below is the remote id reported in the dis-
play above.
(Alcatel) # show vpdn tunnel l2tp
L2TP Tunnel Information (Total tunnels = 1)
Tunnel ID = 17767 is up, remote id is 67
Tunnel state is SCCCN: Connection Connected
Remote Internet Address 10.3.14.199, port 1701
Control Ns 38, Nr 7
Local RWS 4, Remote RWS 8
(Alcatel) # show vpdn tunnel l2tp id 67
L2TP Tunnel Information (Total tunnels = 1)