Specifications

Show Commands 851
Chapter 31
show interface fastethernet <slot>/<port> switchport
native-vlan
show interface gigabitethernet <slot> <port>
show interface loopback
This command displays the current configuration of the interface loopback.
show interface mgmt
(Alcatel) # show interface fastethernet 2/1 switchport native-vlan
1 (Default)
(Alcatel) # show interface gigabitethernet 2/24
Gig 2/24 is up, line protocol is down
Hardware is Gigabit Ethernet, address is 00:0B:86:00:17:99 (bia
00:0B:86:00:17:99)
Description: Gigabit-Level
Encapsulation ARPA, loopback not set
Duplex ( AUTO ), speed ( AUTO )
MTU 1500 bytes, BW is 2000 Mbit
Last clear of "show interface" counters 1 day 22 hr 28 min 34 sec
link status last changed 1 day 22 hr 28 min 34 sec
0 packets input, 0 bytes
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input error bytes, 0 CRC, 0 frame
0 multicast, 0 unicast
0 packets output, 0 bytes
0 output errors bytes, 0 deferred
0 collisions, 0 late collisions, 0 throttles
This port is NOT TRUSTED
(Alcatel) # show interface mgmt
mgmt is up line protocol is up
Hardware is Ethernet, address is 00:0B:86:FF:FF:D4