Specifications

OmniAccess Reference: AOS-W System Reference
840 Part 031652-00 May 2005
Layer 2/Layer 3 Commands
Layer 2 Commands
show mac-address-table
Displays the MAC addresses that have either been learned or that have been
manually configured for each device.
Information returned by this command is:
z Dynamic Address Count: The number of MAC addresses discovered
dynamically by the switch.
z Static Address Count: The number of MAC addresses manually config-
ured in the switch
z System Self Address Count
z Total MAC Addresses: The total number of addressed in the database.
z Maximum MAC addresses: The maximum number of MAC addresses
allowed in the table.
z Destination Address: A specific MAC address that has been discovered
or statically configured.
z Address Type: The method of creation of the MAC address, the options
are; Mgmt for vlan entries, Static for manually created addresses, and
Dynamic for address that the switch discovers automatically.
z VLAN: The numeric designation of a vlan created on the switch
z Destination Port: the destination port for packets containing the desti-
nation MAC address.
(Alcatel) # show mac-address-table
Dynamic Address Count: 0
Static Address (User-defined) Count: 0
System Self Address Count: 0
Total MAC Addresses : 5
Maximum MAC addresses : 5
MAC Address Table
------------------
Destination Address Address Type VLAN Destination Port
------------------- ------------ ---- ----------------
00:0b:86:00:15:80 Mgmt 1 vlan 1
00:0b:86:00:15:80 Mgmt 7 vlan 7
00:0b:86:00:15:80 Mgmt 99 vlan 99