Specifications

OmniAccess Reference: AOS-W System Reference
828 Part 031652-00 May 2005
Authentication Commands
AAA Commands
The following immediate commands are used for Accounting, Authentication,
& Authorization (AAA). Other AAA commands can be found starting on
page 823.
aaa debug {save-config}
aaa inservice <server name>
Place the named AAA server into service.
aaa test-server <server name> <user name> <password>
Test the response of a configured AAA server. The command checks whether
the user and password combination is recognized by the specified AAA server
and returns a pass/fail response. The server must be able to accept PAP.
Parameters:
aaa user...
Variations:
z aaa user add <IP address> [name <user name>] [role <role>] [mac <MAC address>]
z aaa user delete {<IP address>|all}
z aaa user logout <IP address>
server name The name of the AAA server to test.
user name The name of the user account to test.
password The password for the tested user account.