Specifications

OmniAccess Reference: AOS-W System Reference
826 Part 031652-00 May 2005
WMS Commands
wms ap <MAC address> [mode <type (dos |interfering| valid)>]
This command defines the access point specified by the MAC address
argument as either an interfering, valid, or denial of service type access point.
wms station <MAC address> [mode <type (dos|interfering|valid)>]
This command defines the station specified by the MAC address argument as
either an interfering, valid, or denial of service type station.
wms export-db <filename>
This command is used to export the WMS database to an external file. The file
is exported as an ASCII text file. The filename plus any extensions may be no
longer than 32 characters in length and may contain only keyboard characters.
wms import-db <filename>
This command is used to import the specified file into the WMS database. The
imported file replaces the existing WMS database. The imported file must be a
valid WMS database file previously exported using the wms export-db command.
CAUTION—Attempting to import a file not exported with the wms export-db or
importing a modified file, may result in a serious malfunction of the switch.
wms reinit-db
This command re-initializes the WMS database to the factory defaults. No
automatic backup of the current database is made.