Specifications

OmniAccess Reference: AOS-W System Reference
824 Part 031652-00 May 2005
reload
Reboot the system after prompting the user to verify the command. If there are
any unsaved configuration changes, you will be prompted whether you wish to
save them first.
halt
Shuts down the switch (the switch will not reboot automatically).
rename <filename> <new filename>
Change the name of a system file. To view a list of files, use the dir command.
show
Enter the Show mode (see page 833). The Show mode is used to display a
variety of system information and statistics.
write...
Variations:
z write erase
Erase the system configuration file. The next time the system boots, the configu-
ration will be reset to factory defaults.
z write file <filename>
Save the current configuration to the specified system file.
z write memory
Save the current configuration to the system configuration file. Any configura-
tion changes made during this session will be made permanent.
z write terminal
Display the current configuration.
Layer 2/Layer 3 Commands
ping <IP Address>
This command sends ICMP packets to a host specified by the IP Address
argument.