Specifications

Action Commands 823
Chapter 30
delete <filename>
Delete the specified file from the system. To view a list of files, use the dir
command.
dir
List the system files.
exit
Exit the current mode or sub-mode and return to one above it. When entered
from the privileged mode main prompt (#), this commend returns you to the
user mode.
masterip <master IP address>
This command is used to configure the master IP address of the switch. It is
entered in the standard IP address format (AA.BB.CC.DD.EE).
Use this command to change the role of the switch from Master to Local or
back to Master. Setting the switch’s IP address to the IP address of another
switch configures the switch as a local switch, returning it to its own IP
address makes the switch a Master Switch. In either case, you will have to
reboot the switch to make the changes effective and you will be prompted to
reboot after you enter the new IP address.
z authmgr z master
z cfgm z mmgr
z crypto z mobagent
z errorlog z ppp
z fpapps z pptp
z ha z sapm
z intuser z stm
z l2tp z user
z localdb z wms
destination IP
address
The IP address of the FTP destination for the type.log file.
user name If required, the name of a valid user account at the
destination.
password If required, the password for the user account at the
destination.