Specifications

OmniAccess Reference: AOS-W System Reference
822 Part 031652-00 May 2005
configure terminal
Enter the configuration mode. This mode provides access to system
configuration commands. The commands available depends on the switch
mode. Local configuration commands (see page 445) are available on any
switch. Master configuration commands (page 797) are only available on the
master switch.
copy...
Copy file or image items from one location to another.
Variations:
z copy flash <source filename> flash <dest filename>
Copy a system file.
z copy flash <source filename> tftp <host> <dest filename>
Copy a system file to a TFTP destination.
z copy running-config flash <dest filename>
Copy the current configuration to a system file.
z copy running-config tftp <host> <dest filename>
Copy the current configuration to a TFTP destination.
z copy running-config startup-config
Copy the current configuration settings to the switch configuration file used the
next time the system starts. This is the equivalent of the write memory command
(see page 824).
z copy startup-config flash <dest filename>
Copy the saved configuration to a system file.
z copy startup-config tftp <host> <dest filename>
Copy the saved configuration to a TFTP destination.
z copy tftp <host> <source filename> flash <best filename>
Download a file into the system via TFTP.
z copy tftp <host> <source filename> system {partition0|partition1}
Download a switch software image file into one of the switch image banks.
copy log <type> <destination IP address> [<user name> <password>]
Copy a specified log file to the destination address via FTP. The transferred file
is named type.log.
Parameters:
type A variety of logs are available for transfer: