Specifications

Action Commands 821
Chapter 30
Privileged Mode Commands
Privileged mode is entered from the user mode through the enable command
(see page 820). This mode provides access to configuration and information
collection commands. Privileged mode is indicated by the host# prompt, where
host is the host name of the switch, if defined. From any privileged mode or
sub-mode, you can exit to the user mode using the global exit command.
Switch Management Commands
boot...
Set the configuration file or software image to be used the next time the
system boots.
Variations:
z boot config-file <filename>
Set the name of the file used for the switch configuration data. The named file
will be used when saving the configuration (see the write command on
page 824) and will be loaded the next time the switch is booted. This command
requires a valid file.
z boot system {partition0|partition1}
Set the location of the switch software image to be used the next time the sys-
tem is booted.
clock set <year> <month> <day> <hour> <minute> <second>
Set the switch’s clock to the current date and time.
Parameters:
year The current year, specified in YYYY format (2003, for
example).
month The current month of the year (1-12).
day The current day of the month (1-31).
hour The current hour of the day, specified in 24 hour format
(0-23).
minute The current minute of the hour (0-59).
second The current second of the minute (0-59).