Specifications

Action Commands 819
CHAPTER 30
Action Commands
Action Commands are available from the main Command-Line
Interface (CLI) prompts in user mode and privileged mode. These
commands take effect as soon as they are entered and, if
appropriate, any resulting configuration changes are
automatically saved. Different Action commands are available in
each mode.
This chapter provides a summary of the action commands
available on the Alcatel Wireless LAN Switch in your network. The
command summary is organized by command function. Each
command entry depicts the syntax. Many provide usage details.
For more information on the commands, use the CLI help feature
described on page 18.
User Mode Commands
User mode is entered when you first log in to the Alcatel Wireless
LAN Switch. This mode is indicated by the host> prompt, where
host is the host name of the switch, if defined. From any other
mode or sub-mode, you can return to the user mode using the
global exit command.
Parameters are entered immediately after the command, and are
entered as name-value pairs with a single space separating each
item on the line. There are no delimiters or operators used when
entering parameters. End the line and execute the command by
typing a Carriage Return <Enter> after the command.
An Example of a command would be:
> command_name parameter1 value1 parameter2 value2 <Enter>