Specifications

OmniAccess Reference: AOS-W System Reference
728 Part 031652-00 May 2005
Syntax
hostname <hostname>
where:
<hostname> Specifies the hostname
Example
(Alcatel6000) (config-ha) #hostname labtest
(labtest) >
N
OTE— When you change the hostname you are returned to Exec mode and
must log back in.
Interface Commands
Allows access to the interface type commands. This release supports the
following interfaces:
z FastEthernet IEEE 802.3
z GigabitEthernet
z Loopback
z Management (Ethernet)
z Tunnel
z VLAN
interface fastethernet <slot/port>
Accesses the FastEthernet mode which allows you to configure the
Fastethernet interface for the specified port on the specified slot.
Syntax
interface fastethernet <slot/port>
where:
slot is the chassis slot of the module to be configured Range is
port is the specific port on the module to be configured. Range is:
Example
(switch) (config) # interface fastethernet 1/1
(switch) (config-if) #