Specifications

OmniAccess Reference: AOS-W System Reference
722 Part 031652-00 May 2005
is the number of pings per second allowed. Higher number of pings per
second are deemed to be an attack. Valid range is 1-255 pings per
second.
Example
firewall attack-rate session
Configures the firewall to monitor the number of IP sessions.
Syntax
firewall attack-rate session <number>
where
<number> is the limit of the number of IP sessions that can occur. Higher
numbers of IP sessions than this limit are considered an attack. Valid
range is 1-255 IP sessions per second.
Example
(Alcatel2400) (config) #firewall attack-rate session 33
(Alcatel2400) (config) #
firewall attack-rate tcp-syn
Configures the firewall to monitor SYN attacks.
Syntax
firewall attack-rate tcp-syn <number>
where <number> is the threshold above which incoming TCP SYN traffic will
be considered an attack. Valid range is 1-255 SYN messages per second.
Example
(Alcatel2400) (config) #firewall attack-rate tcp-syn 44
(Alcatel2400) (config) #
firewall deny-inter-user-bridging
Disallow forwarding non-IP frames between untrusted users .
Syntax
firewall deny-inter-user-bridging