Specifications

AOS-W Commands 713
Chapter 29
(Alcatel6000) (config) #
destination
Syntax
destination STRING <IP address><subnet mask> [invert | <cr>]
Where:
STRING is the name of destination host or subnet
IP address is the IP Address of destination host or subnet
<subnet mask> is the subnet mask of the destination host
invert Specifies to use all destinations EXCEPT this destination
Example
(Alcatel6000) (config) #destination farleytech 67.121.71.218
(Alcatel6000) (config) #destination farleytech 67.121.71.218 invert
(Alcatel6000) (config) #
dot1x Commands
Controls the 802.1x configuration which includes the following commands:
default Set global 802.1X parameters to default values
framed-mtu Set the Framed-MTU attribute sent to the
authentication server
key-retries Set the number of retries for the unicast and
multica
st key rotation message
key-size Set the Dynamic WEP Key Size, Default Key Size
is 128
-Bit
max-req Set maximum number of identity requests
multicast-keyrotation Enable Multicast WEP Key Rotation
opp-key-caching Enable Opportunistic Key Caching
re-authentication Enable periodic 802.1X authentication
reauth-max Maximum number of reauthentication attempts
server Set authentication server parameters