Specifications

RF Design 51
Chapter 4
The Suggested AP Table lists the coordinates, power, location, power setting,
and channel for each of the APs that are shown in the floor plan.
AM Plan
The AM Plan feature calculates the optimum placement for your air monitors
(AMs).
Initialize
Initialize the Algorithm by clicking on the Initialize button. This makes an initial
placement of the air monitors and prepares RF Plan for the task of determining
the optimum location for each of the AMs. As soon as you click the Initialize
button you will see the AM symbols appear on the floor plan. Air Monitors are
represented by this symbol.
Start
Click on the Start button to launch the optimizing algorithm. You will see the
AM symbols moving on the page as RF Plan finds the optimum location for
each.
The process may take several minutes. You may watch the progress on the
status bar of your browser. The algorithm will stop when the movement is
less than a threshold value calculated based on the number of AMs. The
threshold value may be seen in the status bar at the bottom of the browser
window.