Specifications

OmniAccess Reference: AOS-W System Reference
702 Part 031652-00 May 2005
(Alcatel6000) (config) #
clock Commands
Configures the Wireless LAN Switch’s clock to show the Switch’s timezone
and to toggle to Daylight Saving Time as appropriate for the timezone setting.
clock summer-time
Configures the start of summer (daylight saving) time.
Syntax
clock summer-time <WORD> recurring [<1-4>|first|last>] [day] [month]
{hh:mm] [<1-4>|first|last>] [day] [month] {hh:mm] [<-23-23] [<0-59>] <cr>
where:
<WORD> is the label of the timezone. This label should be no less than three and
no more than five characters long and should not start with a colon (:).'
recurring specifies that the Switch should start daylight saving time everytime
the starting specifications are met.
[<1-4>|first|last>] [day] [month] {hh:mm] specifies the week, day of the
week, month, and exact hour that the switch to daylight saving time should
start.
[<1-4>|first|last>] [day] [month] {hh:mm] specifies the week, day of the
week, month, and exact hour that the switch to daylight saving time should
end.
<-23 - 23> is the number of hours offset from UTC.
<0-59> is the number of minutes of offset from UTC.
Example
The following example specifies that daylight saving time should start the first
Sunday in April at 2 AM and end the last Sunday in October also at 2 AM. The
timezone is Pacific Standard Time and the offset from Grenwhich time is -8
hours.
(Alcatel6000) (config) # clock summer-time PST recurring 1 Sunday April
02:00 4 Sunday )October 02:00 -8 0
(Alcatel6000) (config) #
NOTE—Be sure to configure clock timezone when configuring summer-time.
clock timezone