Specifications

OmniAccess Reference: AOS-W System Reference
50 Part 031652-00 May 2005
Colored circles around the AP symbols on the floor plan indicate the
approximate coverage of the individual AP and the color of the circle
represents the channel on which the AP is operating. The circles appear when
you select an approximate coverage value on one of the Floors pages. You may
also use click on an AP icon and drag it to manually reposition it.
Start
Click on the Start button to launch the optimizing algorithm. You will see the
AP symbols moving on the page as RF Plan finds the optimum location for
each.
The process may take several minutes. You may watch the progress on the
status bar of your browser. The algorithm will stop when the movement is less
than a threshold value calculated based on the number of APs. The threshold
value may be seen in the status bar at the bottom of the browser window.
Viewing the Results
The results of optimizing algorithm may be viewed two ways: graphically and
in a table of suggested APs. You may obtain information about a specific AP
by placing the cursor over its symbol. An information box appears containing
information about the exact location, PHY type, channel, power, etc.