Specifications

AOS-W Commands 689
Chapter 29
Example
(Alcatel6000) (config) #aaa stateful-authentication dot1x default-role
pauldefrole
(Alcatel6000) (config) #
aaa stateful-authentication mode
Enables or disables 802.1x stateful authentication.
Syntax
aaa stateful-authentication dot1x mode <disable | enable >
Where:
disable turns this feature off
enable turns this feature on
<cr>
Example
(Alcatel6000) (config) #aaa stateful-authentication dot1x mode enable
(Alcatel6000) (config) #
aaa stateful-authentication dot1x timeout
Configures the allowed length of time allowed to elapse between receiving a
RADIUS Request from a AP (NAS) and the response from the Authentication
Server.
Syntax
aaa stateful-authentication dot1x timeout <0-20>
Where
<0-20> is the valid range of time that can elapse in the reply
Example
(Alcatel6000) (config) #aaa stateful-authentication dot1x timeout 10
(Alcatel6000) (config) #
aaa stateful-authentication kerberos
Specifies Kerberos as the stateful authentication method.
Syntax
aaa stateful-authentication kerberos enable