Specifications

AOS-W Commands 687
Chapter 29
where the options to this command are:
STRING specifies the name of RADIUS server.
acctport specifies the port number used for accounting
authport specifies the port number used for authentication (default is port
1812)
host specifies the IP address of the RADIUS server
inservice enables the server into service immediately
key specifies the shared secret text string
match-essid requires a match the specified ESSID
match-fqdn requires a match to the specified FQDN
mode enables or disables the use of the RADIUS server
nas-identifier configures the NAS-Identifier attribute in RADIUS packets
r e t r a n s m i t s p e c i f i e s t h e m a x i m u m n u m b e r o f t i m e s a R A D I U S r e q u e s t i s
retried
timeout specifies the timeout period for RAD I U S r e q u e s t . T h e d e f a u l t i s
10 seconds.
trim-fqdn trims the FQDN from the user name before sending to server
<cr>
Example
(Alcatel6000) (config) #aaa radius-server bigboy acctport 2550 authport 88 host
10.200.200.20 inservice key blue match-essid COFFEE match-fqdn Alcatel.COM mode
enable nas-identifier 254 retransmit 3 timeout 30 trim-fqdn
aaa stateful-authentication dot1x ap-config
Configures the AP and Radius Server parameters for stateful inspection.