Specifications

OmniAccess Reference: AOS-W System Reference

644 Part 031652-00 May 2005

Example

(switch) #ads netad learn

Configures scanning on the specified channel for the specified Air Monitor.

Syntax

am scan <am-ip> <channel> <bssid>

where:

<am-ip)> is the IP address of the Air Monitor to be scanned.

<channel> is the channel to tune to. Set this to 0 to start scanning.

<bssid> is the MAC Address of the Air Monitor

Example

(switch) #am scan 10.4.4.4 11

Module AM is busy. Please try later

ap-upgrade-config

Allows you to convert your existing 802.11b configurations to support 802.11g

as well.

Example

(switch) #ap-upgrade-config

(switch) #

apflash

Reflashes the specified Access Point.

Syntax

(switch) #apflash <ipaddr>

Example

(switch) #apflash 192.10.10.1

audit-trail

Example

(switch) #audit-trail