Specifications

OmniAccess Reference: AOS-W System Reference
636 Part 031652-00 May 2005
Online help is available for all commands by pressing ?. There are two levels of
help.
To see what other command strings match what you have entered, type ? at
the end of the string (no space) for which you want information. For example:
(switch) #reload?
reload Coldstart the switch
reload-peer-SC Coldstart the peer Supervisor Card (OmniAccess 6000)
shows you what commands start with the string reload.
To see help text for a command, enter the command for which you want help,
enter a space, then type ?. For example:
(switch) #ping ?
<ipaddr> Send ICMP echo packets to a specified IP address.
Tips
To save time in entering commands, you only need to enter the first unique
characters, then press Tab. The CLI will complete the rest of the command
string.
The following sections explain the commands that are available at each mode.
Notice that AOS-W Wireless LAN Switch commands are not listed
alphabetically as one might expect in a reference manual. Because commands
only apply in the mode, or context, in which they are executed, this chapter
lists commands alphabetically by mode. This is intended to help you
understand the difference, for example, of a aaa command in Privileged mode
versus a aaa command in Configuration Terminal mode. Commands that
function the same across all modes, (exit or traceroute, for example) are
defined once and cross referenced.