Specifications

OmniAccess Reference: AOS-W System Reference
578 Part 031652-00 May 2005
FIGURE 25-18 Sample Report
You can change the status of a rogue or interfering device by clicking Set as
Valid
, Set as Interfering, Set as Known Interfering, etc. If necessary, you can also
turn off any device by clicking Disable.
Example Report: Rogue APs
To analyze active rogue AP activity, go to Reports > Active Rogue APs to display
the screen shown above. You can examine the list and determine if you want
to mark any APs as interfering as opposed to rogue. You can also change the
status of any AP displayed from rogue to interfering or to valid. You can also
shut down any AP by clicking
Disable.